Battery Testing Laboratory

Battery Testing Laboratory
Accredited to SNI ISO/IEC 17025 by KAN since 2002 Battery type: VRLA (cell & system battery); Lithium-ion battery Test capacity: voltage 0-100Vdc/current: 0-100 A
Share:

BRIN PV TEST LABORATORY

BRIN PV TEST LABORATORY
BRIN PV Lab (LPKMF) was built in 2018, inaugurated in Jan 2019, and accredited by SNI ISO/IEC 17025:2017 March 2021. Received a Decree on the Appointment of B2TKE as a PV c-Si Module Certification Test Lab from the Director General of NRE and MEMR on January 7, 2021. Testing Scope: SNI IEC 61215-1:2016 SNI IEC 61215-1-1:2016 SN…
Share:

Interoperability in Microgrids to Improve Energy Access (cooperation with Twente University)

 Interoperability in Microgrids to Improve Energy Access (cooperation with Twente University)
Background Energy access remains a critical challenge in many parts of Indonesia and other developing regions, especially in remote and off-grid areas.  Microgrids, which integrate local renewable energy sources (such as PV, wind, and biomass) with energy storage and backup generators, offer a promising solution.  However, a …
Share:

Optimization of Hybrid Power Systems Based on Variable Renewable Energy (VRE) and Diesel Generators in Indonesia

Background Indonesia, with its vast archipelago and many remote areas, relies heavily on diesel generators for electricity supply, and contribute significantly to carbon emissions.  Integrating Variable Renewable Energy (VRE) sources such as solar PV and wind with diesel generators can reduce fuel consumption, lower costs, a…
Share:

End-of-Life Management and Recycling Strategies for Solar PV Modules in Indonesia

Background Indonesia is experiencing rapid growth in solar energy adoption, with increasing installed capacity targets.  However, as the number of deployed solar panels rises, the issue of end-of-life (EoL) PV module waste has become a major concern.  PV modules have an operational lifespan of approximately 25–30 years, meani…
Share:

Integration of Solar PV and Battery Energy Storage Systems (BESS) for Rural Electrification in Indonesia

 Background Indonesia, with over 17,000 islands, has many remote areas that lack optimal electricity access. Power supply in these regions is still heavily dependent on diesel generators, which are costly and environmentally unfriendly. Solar Photovoltaic (PV) power plants combined with Battery Energy Storage Systems (BESS)…
Share:

Strengthening Quality Infrastructure for the Photovoltaic (PV) Sector in Indonesia (cooperate with PTB Germany)

 Background Indonesia’s photovoltaic (PV) sector is growing rapidly, driven by increasing renewable energy targets and government incentives.  However, ensuring the long-term reliability, safety, and efficiency of PV systems requires a robust quality infrastructure (QI), which includes standards, certification, testing facil…
Share:

Design and Innovation of Floating and others PV Systems

Design and Innovation of Floating and others PV Systems
1. Floating Solar PV system: Demonstration plant at Puspiptek Serpong; Feasibility study FPV at Lake Towuti (South Sulawesi); Sigura-gura (North Sumatera), etc 2. Rooftop PV systems: feasibility study and commissioning test of PV Rooftop at government, industry, and commercial buildings 3. …
Share:

Optimization of Floating Solar PV Systems for Indonesia’s Tropical Climate and Water Bodies

Optimization of Floating Solar PV Systems for Indonesia’s Tropical Climate and Water Bodies
Background As an archipelagic country with numerous lakes, reservoirs, and coastal waters, Indonesia holds great potential for Floating Solar PV (FSPV) development.  This technology reduces land use requirements while offering enhanced solar panel efficiency due to water’s cooling effect.  However, the implementation of Float…
Share:

PV Module Qualification Test and Certification for Local Manufacturing

PV Module Qualification Test and Certification for Local Manufacturing
The study is focused on PV modules with crystalline silicon (c-Si) cells, which represent the dominant technology with over 90% of the market share and of cumulative installations                               The quality factor of PV module is one of the important issues in ensuring the reliability of the PV power system.…
Share:

PUBLICATIONS

PERFORMANCE AND RELIABILITY OF PV MODULES IN INDONESIA, EUPVSEC 2023 IN LISBON, PORTUGAL  Effects of cleaning interval of PV module and pyranometer on PV system performances in tropical climate of Indonesia; Results in Engineering, Volume 25, March 2025, 103959, https://doi.org/10.1016/j.rineng.2025.103959 Solar still double…
Share:

PHOTOVOTAIC (PV) SOLAR ENERGY RESEARCH GROUP

PHOTOVOTAIC (PV) SOLAR ENERGY RESEARCH GROUP
Focus of the Photovoltaic Solar Energy Research Group (PVRG) is set on performance and reliability of photovoltaic systems under hot and tropical climate, PV module design and characterization, PV system design and optimization, as well as investigates future PV concepts and systems. Vision To become a nationally and interna…
Share:

PV Module Test Laboratory

PV Module Test Laboratory
Lab PV (LPKMF) dibangun 2018, diresmikan Jan 2019, dan terakreditasi SNI ISO/IEC 17025:2017 Maret 2021. Mendapatkan SK Penunjukan B2TKE sbg Lab Uji Sertifikasi Modul PV c-Si dari Dirjen EBTKE KESDM pada 7 Januari 2021. Ruang lingkup:  a. SNI IEC 61215-1:2016 b. SNI IEC 61215-1-1:2016  c. SNI IEC 61215-2:2016 Jenis layanan yang d…
Share:

RESEARCH FACILITIES

RESEARCH FACILITIES
The Energy Conversion Laboratory has several testing services and has been accredited with SNI ISO/IEC 17025:2008 by the National Accreditation Committee (KAN) since 2002 with no. LP-096-IDN. Photovoltaic Component and System Testing Laboratory Layanan pengujian Komponen dan Sistem Fotovoltaik.(LPKSF) PV Module Quality Testin…
Share:

Research and Development on Advanced Solar Energy Storage Systems

Research on advanced solar energy storage systems focuses on improving efficiency, reliability, and integration with solar power generation. The main objectives are to enhance energy storage capacity, durability, safety, and cost-effectiveness, enabling stable and long-term renewable energy utilization. 1. Next-Generation B…
Share:

Research and Development of Smart Hybrid PV Systems

Research and development in Smart Hybrid PV Systems focus on integrating multiple energy sources with advanced control technologies to improve reliability, efficiency, and sustainability. These systems combine solar photovoltaics (PV) with other renewable and non-renewable energy sources to optimize power generation and st…
Share:

Mobile Floating PV System (MFPV) for Agriculture Irrigation

Mobile Floating PV System (MFPV) for Agriculture Irrigation
Mobile Floating PV System (MFPV) for Agriculture Irrigation   Pompa Air Tenaga Surya yang ditempatkan diatas permukaan air  Water jet untuk perpindahan sistem PLTS Terapung KEUNTUNGAN Menghemat penggunaan bahan bakar Ramah lingkungan Tidak membutukan lahan tambahan Dapat berpindah tanpa menggunakan energi tambahan HAKI: P002023148…
Share:

Development and Demonstration of Floating PV Systems

Floating PV (FPV) systems, also known as floating solar farms, are an emerging technology that integrates photovoltaic panels on water surfaces such as reservoirs, lakes, and oceans. FPV research focuses on enhancing energy efficiency, optimizing system design, mitigating environmental impact, and improving durability in v…
Share:

Research and Development on Advanced Solar PV Modules for Tropical Climates

Research on advanced solar photovoltaic (PV) systems for tropical climates aims to improve efficiency, durability, and adaptability under high temperatures, humidity, and intense solar radiation. The key focus areas include: 1. Identification of Solar PV materials Temperature-resistant solar cell materials: Research on new c…
Share:

Accelerated Stress Testing of PID Susceptibility of PV Modules

Accelerated Stress Testing of PID Susceptibility of PV Modules
Potential Induced Degradation (PID) is one of the severe failure modes observed in the field with high system voltage, high humidity, and high operating temperature.  The PV module needs to be tested for PID susceptibility as per site conditions before installation in the field.  This study analysed the effect of temperatur…
Share:

Standardization, Testing and Certification for PV Module Reliability

Standardization, Testing and Certification for PV Module Reliability
The quality factor of PV module is one of the important issues in ensuring the reliability of the PV power system.  The Indonesian government has issued the Minister of Energy No. 2/2021, concerning Application of Quality Standards for Crystalline Silicon Photovoltaic Modules in accordance with SNI IEC 61215:2016. The study…
Share:

Research on Reliability, Performance, and Durability of PV Modules

Photovoltaic (PV) module research focuses on enhancing reliability, improving performance, and extending lifespan to ensure long-term energy production efficiency in various environmental conditions. The research covers material advancements, degradation mechanisms, testing methods, and performance optimization …
Share:

Recent Posts

Categories